Bell and Carlson Winchester Model 70 Long Action Stock Reviews

Using the Bell & Carlson Extreme Weather #7775 / 7776 Stocks With A Two-Piece Floorplate

I couldn't resist. The Bell & Carlson ultralight stocks for Winchester Model 70 rifles are above and beyond the all-time stocks for the coin - ultra calorie-free weight hand lay-upwards fiberglass construction with their famous Medalist tip-to-grip aluminum bedding chassis. The aluminum exposed under the receiver generally wrings all there is to get from a rifle, and this trusted sometime servant of mine shoots a consistent minute-of-angle with anything I care to put through it. These stocks are a bargain for two-hundred bucks, and ideally suited for these featherweight rifles. I'd be conveying this one all over North America and Africa so weight is important, and the aluminum sure wouldn't injure accuracy none. The truth is I've been meaning to do it since these stocks came out a couple years ago.

There is merely one minor item - Bell & Carlson makes these every bit original equipment to fit Winchester'south electric current Extreme Weather Brusque Magnum model rifles. These come with one piece floorplates and my trusty old 1990 rifle has the two-piecer, plus the WSM butt is a flake thicker that the one on my old Featherweight. My skinny butt will not create any exceptional issues (sort of an extreme free-bladder situation) other than aesthetics, and I can always bed it if I don't like it. However the hinged role of the magazine cover associates is not as thick or as long as the single slice models, so I'd either take to buy a new one, which we sell here or simply make arrangements to utilise mine as it is. I chose the latter with the idea that I could always get another one downwards the road if I establish a practiced bargain on information technology, and nothing would be lost to use mine as it is. Here's how I did information technology ... (note, this is a work-around and so don't complain it doesn't look as good every bit the floorplate it was made for. Hey, if you want perfection bound for the correct floorplate from Stocky's and skip this commodity. I'thou only posting it because you asked me too and no one but you tin exist responsible for the results ...)

---

Here's what you lot have when y'all become all the parts on the table:

1. Barreled action
   (remove the cartridge bolt for safety and convenience)
2. Bong & Carlson Ultralight stock
3. Magazine (a.k.a. magazine box or liner)
4. Cartridge follower with attached leap
   (remove it from the mag encompass assembly)
5. Magazine cover assembly
6. Trigger guard
7. Three takedown screws
   (2 on baby-sit, one on mag cover swivel)

---

Assembling the parts loosely into the stock we tin can brand a couple observations:

1. The trigger guard is a great fit as information technology is. Little or nothing has to be done there.
2. The hinge on the magazine cover is thinner than a i-piece unit of measurement, this makes it sit down too deep into the stock to close the cover. One must add some spacers under it to become it to fit flush.

On some rifles, a couple of washers under the swivel is all it will have to gather it all, but since this rifle will get hard use I wanted to secure the magazine box more than solidly into everything so in lieu of a standard washer I decided to grind a wide "pan washer" (available at any hardware shop) to fit into the recess nether the swivel - information technology would extend just far enough into the mag box to secure it solidly into the stock.

---

Choosing stainless steel washers would ensure years of trouble-free hunting in the result I got decorated and never replaced the floorplate, an extremely likely occurence. On my item rifle two standard washers and ane fitted pan looked to be the perfect thickness to flush everything up properly. I noticed that different brands of washers were of differing widths and thicknesses too, so I purchased a selection (total investment was $3.25) and fix forth to fit the big 1 and assemble.

---

Utilizing a sophisticated complement of tooling and machinery (too known as channel-lock pliers and a bench grinder) I had at it until I achieved the desired outcome. This took all of well-nigh 15 minutes if you lot count the time I spent at the chugalug sander taking the burrs off the completed pan washer. Don't really know why I did that since you can't see it after assembly, but what the heck.

I also toyed with the thought of polishing it but didn't desire the crew, who was standing there watching the entire attempt, to injure themselves laughing whatsoever more.

(I was likewise planning to put it in the vise and use a file so it'd be actually nice and neat but was in a hurry ... wanted them all to get dorsum to work anyway.)

---

As you tin come across information technology's a very efficient method of securing everything.

(I've done it before so I already knew that, but I want yous guys to be comfortable with it as well.)

---

Here'south what the completed assembly looks like ... y'all machinists out in that location can simply manufacturing plant the correct piece that accomplishes this very neatly for a more than professional parcel. This would really impress your customers I imagine.

---

Equally an added do good I didn't have to gratuitous-float the butt. If and when I get around to it (I lost the ane Zig Zigler gave me thirty years ago) I may lay a couple inches of black epoxy under the barrel just in front end of the receiver to back up the chamber region, keep everything a bit more than centered and make it a scrap prettier. At that place's the perfect space there for it every bit you can see.

Dubiousness if information technology'd shoot any better though, sub-Thousand.O.A. is simply fine for my big game rifles and it shoots like a business firm afire like it is.

---

Hither's why I did information technology - seven lbs. ten oz. scoped. Hey, in that location's a gap on the bottom (see photo) and it doesn't look every bit practiced as a one slice floorplate could merely saved me a hundred bucks so who cares? You lot can't see it unless you are looking for it anyway. (DON'T Try THIS IF It BOTHERS YOU; DON'T COMPLAIN Nearly IT BECAUSE IT WAS Not MADE TO BE THIS Mode! I'g but showing you how you can go it together on a budget.)

I did information technology because at present I have an aluminum bedded fiberglass stock instead of the world's cheapest plastic for about three hundred bucks. Prissy Decelerator pad, too. Makes my .308 shoot like light amplification by stimulated emission of radiation withal kick like a kitten. I can safely say this is my favorite deer rifle to appointment, what more could you ask for?

Stocky

huffcomplem93.blogspot.com

Source: https://www.stockysstocks.com/winchester-70-bell-carlson-7775-7776/